Drilling a hole into bricks can become an impossible task without the right tools.
Sure, there is an infinite number of ways to put a hole in a brick. However, with the best masonry drill bit set, you can make a perfectly clean hole with so much ease.
But what is the best drill bit for brick? Well, the best masonry drill bits are:
- Built for longevity
- Designed to stay sharper for longer
- Made to drill precisely
So, in this guide, we’ll look at some of the best masonry drill bits on the market today. Check them out.
Comparison of Popular Drill Bits for Brick on the Market
There are so many things to take into consideration when picking the right drill bits for the job. So, we’ve compared some of our top picks below since it’s not always easy to find the right one.
The Best Brick Drill Bits Reviewed & Ranked in 2024
1.Owl Tools Masonry Drill Bits Set, 10 Piece
Material: Carbide
Finish Type: Carbide
Tool Flute Type: Spiral
Surface Recommendation: Concrete, Brick, Ceramic Pots, Cinder Block, Stucco, Cement, Tile and More
Sizes: 1/8″, 1/4″, 5/16″, 3/8″
It comes with many bit pieces than most products in this review.
As such, it can easily drill through different materials including:
- Concrete
- Ceramic
- Brick
- Glass
- Tile
As if that’s not enough, it boasts industrial grade carbide tips to ensure maximum durability.
The best part? Thanks to their durable construction, they will stay sharper for longer compared to typical steel drill bits.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Rust-free storage case
- Available in different sizes
- Boasts industrial strength
- Resistant to overheating
- Some of the bits are not very durable
2.Bosch Carbide-Tipped 7 Piece Set
Material: Carbide
Shank Type: SDS
Tool Flute Type: Spiral
Surface Recommendation: Concrete, brick, block and more
Sizes: (1) 3/16″ x 2″ x 4″, (1) 1/4″ x 2″ x 4″, (2) 1/4″ x 4″ x 6″, (1) 5/16″ x 4″ x 6″, (1) 3/8″ x 4″ x 6″, (1) 1/2″ x 4″ x 6″
TODAY’S DEAL on HOME DEPOT TODAY’S DEAL on AMAZON
- Brick
- Concrete
- Block
Basically, the set features carbide-tipped heads that are tougher, harder, and more resistant under heavy loads.
What’s more? It is equipped with a centric tip to provide you with maximum hole geometry and rounder holes.
On top of that, the bit is equipped with an optimized flute design to minimize bit stress.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Heavy-duty construction
- Runs cooler
- Storage case for portability
- Wear marks alert for tips
- A little bit short
- Relatively pricey
3. Makita 7 Piece Drill Bit Set
Material: Carbide
Shank Type: Straight
Surface Recommendation: Brick, Concrete
Drill Bit Sizes: 3/16″, 5/32″, 1/4″, 5/16″ and 3/8″
Number Of Pieces: 7
This product might fit your budget.
The kit comprises 7 high-quality bits and in different sizes to choose from.
The bits feature premium tungsten carbide tips that provide drilling unmatched in:
- Durability
- Reliability
- Safety
More importantly, the set is sleeve protected for good safekeeping.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Compatible with all hammer drills
- Makes drilling easy and fast
- Offer long-lasting performance
- Flute design for easy concrete removal
- For light-duty drilling only
4. EDiamondTools Dry Core Bit
Material: Diamond
Shank Type: Threaded
Tool Flute Type: Spiral
Thread: 1/2″ Shank
Drilling depth: 9.5″
Diameter: 4 inch – Pilot Bit Includes
TODAY’S DEAL on HOME DEPOT TODAY’S DEAL on AMAZON
- Featuring high diamond concentration, the quality and durability of this product is second to none.
- It is available in multiple sizes and can drill up to 9.5 inches depth.
- As if that’s not enough, the kit comes with a pilot bit to help you make the hole profile in just a single operation.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Drills soft brick and concrete block
- Quality guaranteed
- Produces perfectly bored holes
- Robust construction
- A little pricey
- Requires a lot of force and strength
5. EZARC 5PC Multi-Purpose Drill Set
Material: Carbide
Shank Type: Hex
Tool Flute Type: Spiral
Drill Bit Sizes: 5/32, 3/16, 1/4, 5/16, 3/8 inch
Surface Recommendation: Metal, Brick, Block, Soft Tile, Wood, Plastic, Fiber Cement.
Well, you may want to consider this set that boasts high-quality tungsten carbide heads for long-lasting performance.
- Each drill bit is equipped with multi-grind sharp edges.
- This design provides high drilling speed even in hard materials like metal.
- On top of that, it has a big “U” flute design that cleans out debris fast and efficiently.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Flatted shanks for optimal grip
- Multi-purpose tool
- Made of hardened steel
- Comes in different lengths and sizes
- Can overheat
- Gets dull too quickly
6. Hanperal 65mm SDS Drill Bit
Material: Metal
Shank Type: SDS-Plus
Size: 65mm / 2.6 inches
Total Length: 70mm / 2.8 inches
Suitable For: brick, concrete walls, air conditioning openings
TODAY’S DEAL on WALMART TODAY’S DEAL on AMAZON
As such, it is sure to stay strong whether you’re drilling:
- Bricks
- Walls
- Stones
- Installing air conditioning
What’s more? Besides the bit, the kit also includes SDS plus shank for ease of use with both rotary hammers and impact drills.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Simple operation
- Makes clean and smooth cuts
- Offers easy and stable clamping
- Great quality for the price
- Pilot bit tends to fall out
- Not heavy-duty
7. ZINMOND Masonry Drill Bits
Material: Stainless Steel
Shank Type: 3-Flat
Tool Flute Type: Spiral
Sizes: 1/8″ (3 inch length – 2 included), 1/4″ (4″ length – 2 included), 1/4″ (6″ length – 2 included), 5/16 (6″ length), 3/8″ (6″ length – 2 included), and 1/2″
Lifetime warranty and money back guarantee
- You see, the surface of the drill bit has undergone anti-rust treatment and a complete grinding process.
- This helps ensure a higher hardness level and optimal resistance to wear compared to most drills.
The best part? It features a spear pointed design to allow ease of penetration on various materials like:
- Brick
- Ceramic tile
- Stone
- Concrete
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Premium quality carbide tips
- Convenient plastic storage case
- Smooth drilling and chip removal
- Includes 3 flat shank
- Gets dull pretty quickly
8. Bosch MS4034 34-Piece Drill Set
Finish Type: Black oxide
Number Of Pieces: 34
Applications: Wood, Metal, Masonry
Insert Bits: (1) P1, (1) P2, (1) P3, (1) PZ1, (1) PZ2, (1) PZ3, (1) SL4, (1) SL6, (1) SL7, (1) T15, (1) T20, (1) T25, (1) T30; (1) 2-1/2″
Sockets: (1) 3/16″, (1) 5/16″, (1) 3/8″; (1)
Socket Adapter: (1) Countersink
Black Oxide Drill Bits: (2) 1/16″, (1) 1/8″, (1) 5/32″, (1) 3/16″
Rotary Masonry Drill Bits: (1) 5/32″, (2) 3/16″, (1) 1/4″, (1) 5/16″
Brad Point Bits: (1) 1/8″, (2) 3/16″, (1) 1/4″, (1) 5/16″
TODAY’S DEAL on LOWES TODAY’S DEAL on AMAZON
- This makes it a great choice for different drilling and fastening applications.
And the best part is that the drill bits can drill through most materials.
- What’s more, the driver bits are designed to reduce damage to the screw head while offering better bit gripping power.
- The drill bit tips, on the other hand, feature split points to allow easy drilling starts.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Perfect for everyday tasks
- Hard plastic case for secure storage
- A wide selection of bits
- Easy and fast starts
- Quality of the bits could be better
- Limited 90-days warranty
9. COMOWARE Masonry 7pcs Set
Material: Carbon Steel
Shank Type: Triangle
Tool Flute Type: Spiral
Sizes: 3/16″, 1/4″, 5/16″, 1/4″, 5/16″, 3/8″, 1/2″
Suitable for: Brick, Block, Masonry, Concrete, Rock, Ceramic Tile, Cement and Artificial Stone, Wood, Plastic
- Best of all, the bits are available in multiple sizes to choose from depending on your drilling job.
- More importantly, the product boasts a two-flute design to help minimize bit stress while also allowing fast dust removal.
- The unique design also ensures precise starts and smooth drilling.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Anti-slip handle design
- Resistance against rust
- Spiral shank for increased speeds
- Made from industrial grade material
- The tip is not as strong as advertised
- Dulls easily
10. IVY Classic 10332 Masonry Drill Bit
Material: Carbide
Finish Type: Sandblasted
Shank Type: Round
Diameter: 1/2-inch
Overall Length: 12-inch
Shank: 3/8-inch Reduced Shank
Flute Length: 6-3/4-Inch
- When it comes to these bits, they have been induction hardened to ensure maximum strength.
- The product boasts a tungsten carbide reinforced head along with a sandblasted finish.
- This helps prolong the life of the bits while also ensuring they stay sharp longer.
- Even more, the set features wide flutes for fast and easy dust removal.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Available in a variety of diameters
- Works like a champ
- Drills through a wide range of materials
- Good quality for the price
- The round head does not hold for longer
11. Smithy Hex Shank Drill Bit Sets
Material: Carbide
Shank Type: SDS-Plus
Tool Flute Type: Spiral
Size: 5/32″, 3/16″, 1/4″, 5/16″, 3/8″
Suitable for: Metal, Brick, Block, Soft Tile, Wood, Plastic and Fiber Cement
- It features robust and grounded tungsten carbide head.
- As such, it is perfect for multi-material applications.
- The best part is that the product is equipped with multi-grind sharp edges.
- Thanks to this unique feature, you can enjoy high drilling speeds even in hard materials like brick.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Fast, smooth, and precise drilling
- U flute design for cleaner holes
- Hex shank offers great bit grip
- Convenient quick-change hex handle
- Gets dull after making a couple of holes
12. EANINNO 5 Piece Drill Bit Set
Material: Carbide
Shank Type: 3-Flat
Tool Flute Type: Spiral
Surface Recommendation: Wood, Ceramic, Glass, Plastic
Sizes: 2* 6mm (1/4″), 1* 8mm (5/16″), 1* 10mm (3/8″), 1* 12mm (1/2″)
- You can use it on various materials thanks to its thickened and cemented carbide tip that is sharp and durable.
- Additionally, this masonry drill bit set is engineered with solid twist openings that are smooth so as not to cause tremors.
- It also features U groove design to allow smooth drilling and chip removal.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Hard and durable tip
- Anti-skid handle
- Treated with anti-rust coating
- Easily penetrates various materials
- Quality of the tip is not very good
- Not for use with hammer drills
13. QWORK 5 Pcs Set Drill Bit
Material: Carbide
Shank Type: 3-Flat
Tool Flute Type: Spiral
Sizes: 2x 6mm(1/4″), 1x 8mm(5/16″), 1x 10mm(3/8″), 1x 12mm(1/2″)
Package: Transparent plastic box
Used for: Tile, porcelain, glass, ceramics, cinderblock, plastic and wood, etc.
- As such, the bit can easily penetrate different types of materials with so much ease.
- Like most drill bits, this set features U type slot design to allow fast drilling as well as dust removal.
- On top of that, it comes with 3 flats shank to ensure the bits are held tightly in a power drill.
Information pulled from actual customer reviews to provide the best and worst feedback from major retailer sites
- Heavy-duty construction
- Anti-skid triangular handle
- Accurate centering
- Perfect for drilling fastener holes
- Doesn’t stay sharp longer
- The tips wear out quite fast
Buying Guide
With the sheer number of masonry bits available, knowing which product is best for your needs can be confusing.
For this reason, there are so many things to consider before making the final buying decision.
Size
- Drill bits for brick come in a range of sizes (diameter) that vary from 3 mm to 1/2 inches.
- They are also available in different lengths.
- However, the size of the drill bit you choose depends on the size and length of the hole you plan to make.
- Therefore, it is important that you pick a bit that matches the size of the holes you wish to drill.
Construction
Next up, you should consider the construction of the drill bit as it speaks volumes on its durability and performance.
Most bits are either made from tungsten carbide or hardened steel.
For units made from tungsten carbide, they are known for qualities such as being:
- Highly durable
- Rust-resistant
- Tough
- Stay sharp longer
Drill bits made from hardened steel, on the other hand, are robust and more effective at drilling most surfaces.
However, they are more prone to overheating.
Compatibility with a Power Drill
Whichever drill bit you choose, you should ensure it’s compatible with your power drill.
You see, this consideration will ensure you enjoy a smooth and faster drilling experience.
The good news? Most of these products in this review are designed to be compatible with almost every power drill.
Shank
Lastly, you will need to consider if the set you’re thinking of buying comes with a shank.
- This feature helps ensure the drill bit is held tightly in place when drilling.
- Most bits usually come with flat shanks for optimal grip.
- Some units, on the other hand, are equipped with spiral shanks for maximum speed.
Frequently Asked Questions
In this section, we’ll look at some of the common questions asked about the best tungsten carbide masonry drill bits. Check them out.
Q1: Can I use a normal drill for a brick?
Most bricks are not very hard.
Therefore, they can be drilled with a normal tungsten carbide masonry bit. But for best results, it’s advisable a drill that is specifically designed for brick.
Q2: What kind of drill do I need for a brick?
A hammer drill will get the job done if it’s light masonry.
It works best at drilling holes in concrete blocks, brick, and mortar.
Q3: Which is the best masonry drill bit?
It should have a tungsten carbide tip that can penetrate easily on the hardest bricks.
Also, it should be of the right size and be compatible with your power drill.
Q4: Can I drill into brick without a hammer drill?
Yes, you can.
However, you’ll need to use masonry drill bits in an alternative power tool like the impact drill.
Which is the Best?
For all the right reasons, the Owl Tools Masonry Drill Bits Set, 10 Piece is our top pick.
- We love that it comes with a carbide tip and chrome plating to reduce corrosion and ensure longevity.
- What’s more, the bits come in various sizes and can be used on different materials.
Bottom Line
Masonry drill bits are essential for both homeowners and contractors.
Our selection comprises the best drill bit for brick in the market.
So, whichever bit you settle on, you can be sure of a smooth and easy drilling experience.