An SDS plus chuck is compatible with a hammer drill and provides various attachments which you can fit with the hammer drill. But most importantly, an SDS plus chuck allows for fitting of flat and point chisels, drill bits as well as hammer function.
Rotary hammer drill with SDS-plus chuck is a powerful tool, and is handy in concrete and block demolition operations, steel and masonry jobs, to drill while creating some pressure on the bit for faster drilling.
SDS chucks and drill bits make your overall operations easy, fast,and automated. Besides, you can also switch in between functions without having to swap tool kits as most of these drills are well-accessorized. You need a compact all-in-one kit for your masonry tasks.
We have the best SDS plus hammer drills, steady and high potent for your concrete and block projects. Check out our top suggestions for you.
Top-Rated SDS Plus Hammer Drills: Comparison Table
We give a review of top-quality SDS plus hammer drills, their remarkable features, and their performance. However, if you won’t click through to the end, you can have a glance at our comparison list for an inclusive product overview.
10 Top-Rated SDS Plus Hammer Drills
Buying a hammer drill depends on several factors that determine the power and efficiency of your tool. Check out some of these features before you settle on a specific one:
- Motor amperage
- Amount of impact energy in ft-lbs
- Drilling capacity
- Impact frequency speed in RPM and BPM
- Power source
Here’s a list of the top-quality SDS plus hammer drills that you may need to accomplish your drilling tasks in seconds.
Best SDS Plus Hammer Drill
1. Makita Rotary Hammer Drill (HR2475 1”)
This is a powerful and efficient hammer drill running on a 7 AMP motor to generate 0- 1100 RPM and 0- 4500BPM for heavy-duty applications. It is also equipped with a torque limiter to avoid gear damage through auto disengaging when the bit gets into a stuck position.
- Power Source: Corded Electric
- Voltage: 120 Volts
- Speed: 4500 RPM
We like that it has 3 operating modes: ” hammer only”,” hammer with rotation”, or “rotation only” for various functions. Besides, the handle is all-comfortable D-shaped with a rubber grip so you have control of the tool. Also, the chuck allows for faster bit changes.
Buyer’s Feedback Section
Overall Rating – 4.8 of 5 Stars
- High-quality design
- 3 operating modes to customize use
- Easy to change a bits
- Effective on concrete up to 1-inch drilling
- Some buyers had durability concerns
- Wears on hands and wrists after extended use
Buyers are raving about this highly rated drill. Several refer to this as their must-have item for heavy-duty projects, with success on materials such as concrete. Customers share that the drill works quickly and accurately.
2. Bosch Sds Plus Rotary Hammer Drill (11255VSR)
With a Bosch rotary hammer drill, you can tackle tougher tasks since the 7.5 AMP motor produces 0 1, 300 RPM, and 0 5, 800 BPM. Besides, the 2.0 ft/lbs impact energy is for utmost performance.
- Power Source: Corded Electric
- Voltage: 120 Volts
- Speed: 300 RPM
The drill also offers 36-bit positions for the right chiseling angles for comfort and ease of use. Apart from that, it offers a vibration control feature so that you can work as long as you wish.
You’ll enjoy not just the 3- mode function, but also varying speeds with trigger and reverse, which makes bit starting and changing quite easy.
We like that the drill is conveniently packed in a carrying case for ease of travel and storage. The ergonomic D-handle is also comfortable to hold and ensures maximum productivity for the day.
Buyer’s Feedback Section
Overall Rating – 4.7 of 5 Stars
- Excellent performance
- Highly durable design
- Compatible with various SDS plus bit accessories
- Angle of air exhaust not always ideal
Another highly rated drill on our list, customers like the efficiency and durability of this drill. Referred to as a “real workhorse”, multiple buyers have owned this for several years and it has held up to regular use. Buyers mention how little force is required to have success with this tool since it works so well.
3. Milwaukee’s Cordless Sds Plus Rotary Hammer
This is one tool you shouldn’t miss when repairing concrete walls as it generates 0 to 4900BPM, 0-1400RPM, and 1.7ft/lbs impact energy. It can drill up to 1 inch capacity in concrete.
- Power Source: Cordless
- Voltage: 18 Volts
- Speed: 1400 RPM
We like that the SDS chuck allows for faster bit changing and with a brushless motor, your machine is all-energy efficient.
Buyer’s Feedback Section
Overall Rating – 4.8 of 5 Stars
- Energy-efficient tool
- Great impact energy
- Soft-grip D-handle
- Anti-vibration control
- Cordless and used anywhere
- Does not come with the powering batteries
This powerful drill is popular among customers because of its reliable power. Buyers have used this drill for heavy-duty projects such as tile removing and drilling into concrete – “for drilling concrete, it’s perfect.”
4. Vonhaus 10 AMP sds plus rotary hammer drill
You will love the dynamic 10 amp drill with its flexibility in steel, wood, and concrete. It comes with both a regular chuck for the standard bits and an SDS chuck for the SDS plus accessories.
- Power Source: Corded Electric
- Voltage: 120 Volts
- Speed: 850 RPM
- Maximum Chuck Size: 30 Millimeters
The ergonomic textured handle ensures total comfort and more hours for productivity. Also, vibration control makes working a lot easier and less noisy.
We like that the drill comes with a well-accessorized carrying case with SDS drill grease, regular and SDS drill bits and chuck, and a depth gauge.
Buyer’s Feedback Section
Overall Rating – 4.6 of 5 Stars
- Well-accessorized
- Strong impact energy
- Multi-purpose functioning
- Affordable
- Anti-vibration mode
- Speed not variable with on/off optiononly
This heavy-duty drill is a great option for your projects. Customers shared that it is effective at removing tile as well as drilling into concrete. Some shared that this is better suited for a DIY instead of general professional use so keep that in mind.
5. DeWalt Max Sds Rotary Drill And Hammer
If you like cordless drills, this is another high-quality battery-powered drill with up to 0-1100 RPM no-load speed and 0- 4600BPM.
- Power Source: Battery Powered
- Voltage: 20 Volts
- Speed: 1100 RPM
- Maximum Chuck Size: 20 Millimeters
On the other hand, you don’t have to worry about storage as you can hang it around using the retractable hook. They are compatible with SDS plus chucks and drill bits. Although it’s a sturdy tool, you may have to buy the batteries and charger separately besides the major purchase.
Buyer’s Feedback Section
Overall Rating – 4.9 of 5 Stars
- Retractable hook for storage
- Strong and steady drill
- Vibration control options
- Cordless and battery-powered
- Heavier than other options
- Less power in the chipping hammer setting
Not a surprise that a DeWalt comes this highly rated. Customers have used this for both DIY and professional use with great success “Versatile, plenty of power to tackle demo or masonry work.” Consider this one for all sorts of projects and you won’t be disappointed.
6. Bosch SDS rotary hammer drill (1-1/8 inch)
This corded electric rotary hammer is an excellent option for professional DIY home improvement and generates no load 0- 4000 BPM and 0-900 rpm with 8 AMP input.
- Power Source: Corded Electric
- Voltage: 120 Volts
- Speed: 900 RPM
Another unique feature is the torque limiter clutch which prevents any mechanical damage when the bit binds. Furthermore, the vario-lock system gives 12 different bit positions that determine the angles of chisels.
We like that the manufacturers provide a 30-day cash-back return period if you don’t get the service and satisfaction you need.
Buyer’s Feedback Section
Overall Rating – 4.7 of 5 Stars
- Unique compact design
- A comfortable, limited-vibration handle
- 2.4 ft/lbs impact energy
- Variable speeds
- Stability concerns with the depth guide
Buyers have shared that this drill removes tile, brick, and motor with ease. Designed for effortless drilling, this is a durable and reliable addition to your toolbox. Users mention that there is limited vibration because of the design which allows for accurate drilling in various types of materials.
7. Makita HR2641X1 3-Mode Rotary Hammer Drill
With this cordless rotary hammer, the 8 AMP motor releases 2.1 ft/lbs of impact energy which is strong enough to demolish concrete floors within seconds. It is faster than any standard drill and uses vibration control technology to ensure you don’t hurt your wrists while using this tool.
- Power Source: AC
- Voltage: 120 Volts
- Speed: 11000 RPM
Also, the 3-operation mode allows for diversity. However, the hammer function is recessed and only used when needed. The rubber-covered D-handle is comfortable and rotational at 360o for ease of handling.
Buyer’s Feedback Section
Overall Rating – 4.8 of 5 Stars
- Compact size design
- Comfortable rubber handle
- Powerful drilling impact of up to 2.1ft-lbs
- A super-fast drilling action
- Requires SDS bits
“This thing will drill through anything!” – customers are raving over this one. It is powerful yet precise, easily drilling through concrete and other tough materials. Several buyers commented on the durability, sharing that this still works well after years of regular use.
8. AOBEN SDS Plus 13 AMP Rotary Hammer drill
If you need a whole value pack for your masonry job, AOBEN SDS plus hammer drill comes as a complete set. The set contains a 3 piece drill bits, 1 piece flat chisel, 1 point chisel, motor lubricant, 2 pieces carbon brush, and an extra chuck.
- Power Source: Corded Electric
- Voltage: 120 Volts
- Speed: 2150 RPM
- Maximum Chuck Size: 13 Millimeters
On the other hand, the soft grip rubber handles with an ergonomic design make it comfy to hold. Besides, the 13 AMP motor is multi-functional and carries out wood, steel, masonry, and concrete tasks.
We like that this rotary drill comes with a 24 months return service period so that you are guaranteed value for your money.
Buyer’s Feedback Section
Overall Rating – 4.6 of 5 Stars
- Includes most accessories for the drill
- Great Value
- High impact energy from the 13 AMP motor
- Faster and variable drilling speeds
- Heat dissipation and dust-proof bottom
- No reverse trigger
- May blow dust into your face because of air exhaust location
This powerful, well-designed drill is a reliable addition to your toolbox. Buyers mention that this affordable drill works as well as, if not better than some of the pricer options. “I cant brag enough about this drill… I was completely amazed!”
9. ENEACRO SDS-Plus 13 AMP Rotary Hammer Drill
Apart from being an economy pack, the 5.5ft-lbs impact energy renders this corded electric drill a heavy-duty machine for metal and concrete projects. The drill runs at variable speeds with up to 820 RPM and 4200 BPM impact frequency.
- Power Source: Corded Electric
- Voltage: 120 Volts
- Speed: 820 RPM
Besides, the torque limiting clutch ensures safety and protection in case of a high torque force. Also, the all-adjustable handle with an anti-vibration feature ensures a comfy and steady hold on your tool.
We like that it’s properly accessorized with 1 rotary hammer, 1 point chisel, 3 drill bits, 1 flat chisel amongst other tools all under this one machine. Furthermore, the SDS plus chuck machine allows for faster bit changing than the normal SDS chuck.
And most importantly, the customer maintenance team would gladly respond to your warranty and defect-free return claims so you have value or your money back.
Buyer’s Feedback Section
Overall Rating – 4.6 of 5 Stars
- High quality and fast action
- Economical to purchase with all accompaniments
- Durable and long service guarantee
- Great customer service
- Has no reverse mode
This drill is a reliable workhorse for your DIYer toolbox. Buyers found that this one is a great value, without sacrificing performance. “This hammer drill worths its value and exceeds my expectations…It is certainly heavy work and the hammer did a great job which could be used easily.”
10. TACKLIFE SDS Plus Rotary Hammer Drill
The 12.3 AMP motor is tough and steady and runs at 6 levels of different speeds to generate 0-4350 BPM and 0-900 RPM. On the other hand, 5.2 ft-lbs impact energy released is strong enough for projects like metal, steel, stone, and concrete, with various drilling capacities for each material.
- Power Source: Battery powered
- Voltage: 20 Volts
- Speed: 5200 RPM
Besides that, the drill’s four-mode function allows for either function at a time, so that it is used for hammer drilling, drilling, chiseling, or chisel angle adjustment.
On the other hand, ½” chuck is compatible with other standard bits and therefore is multi-purpose for various tasks. And not just that, the adjustable handle provides a non-slip soft grip while maintaining a better hold of the tool.
To avoid wrist and body fatigue, this tool has a vibration damper so that you don’t feel any vibrations even when you have demanding projects. Also, the presence of an integral clutch ensures that high torque force is a control to avoid mechanical damage and also for your security.
If you have to buy this tool, it’s worth it as you’ll manage all manner of projects with this single tool. Plus, it has all the accessories that you need for various jobs. And best of all, it’s affordable and a worthy investment.
Buyer’s Feedback Section
Overall Rating – 4.6 of 5 Stars
- 6 variable running speeds
- Four-mode function
- High quality with anti-vibration setting
- Both value and fair price
- Running at high speeds somehow dangerous especially for chiseling projects
How To Choose The Best SDS Hammer Drill – Buyer’s Guide
If you need to renovate your old concrete walls, floor tiles, or toilet floors,you need tough tools for scouring layer after layer of stone and concrete. But that does not have to last for days. SDS plus hammer drills have all accessories you need; hammers, chisels, and drill bits all within a single kit.
The SDS plus bits have grooves that allow them to move freely during drilling and also facilitate faster bit change compared to standard bits.
Let’s look at some key features you should consider before you settle on a particular hammer drill. Let’s dive in.
Power source
SDS plus hammer drills may be corded electric or cordless. Consider the cost of each before you settle on a specific one. Cordless drills tend to be less costly, though you may have to purchase the batteries separately.
Impact Energy
Higher impact energy means there’s a lot of energy conversion. Hammer drills with high amperage tend to have more impact energy hence more drill power and speeds.
Operational modes
Hammer drills have 3 or 4 operational modes that allow for either hammer drill, hammer only, or drill only. These settings can work with an SDS plus chuck that carries various attachments that you can fix on your hammer drill and switch automatically.
However, you need to be careful as, without moderate use of hammer function, you may break the SDS chuck.
Drilling capacity
Most drills can make holes up to 1-inch depth. It depends on whether you’re working with spread concrete or solid material. You need to be careful not to apply too much pressure and speed, especially when working with hammer and chisel functions.
If you get to know your drilling depth, you can decide on the appropriate drill bits for your job.
Frequently asked questions about SDS Plus Hammer Drills
In this section, we respond to relevant questions about SDS plus hammer drills and their performance. Check out how we respond to each query.
Q: Are SDS drills better?
A: SDS drills are faster than standard drills. The SDS plus drill bits are also easy to slot in and remove than with regular bits.
Q: Can a hammer drill remove tile?
A: A hammer drill removes tiles faster with the right chisel attachment. Hammer and chisel function can scour the tile layers compared to any other attachments.
Q: Can you drill wood with an SDS drill?
A: SDS drills are powerful and with a little pressure they drive bits in faster and with high precision. Wood is no exception as these drills are heavy-duty tools.
Which Is Best? – Our Final Verdict
Although all our SDS plus hammer drills are top quality and steady, our top pick is Makita Rotary Hammer Drill (HR2475 1”). It’s not just affordable, but also easy to operate with the 3-mode system, has 40 different bit changing positions, and a maximum drilling depth of up to 1 inch.
It’s also faster at drilling and has a stable torque control so it’s safe to work with.
Conclusion
Hammer drills make holes into tough material for various construction renovations. And with the right attachments, you can get much work done within a short period.
We have the best SDS plus hammer drills for your stone and masonry projects. Check out our list above for our top selection of efficient and long-lasting hammer drills in-store today.