Are you having difficulties when trying to drill straight perpendicular holes? Well, don’t worry anymore. We’ve got a few solutions for you that will make it easier and more accurate to achieve perfect holes for your different projects.
Drilling a straight hole is important since it allows you to complete your tasks and activities without having to make changes or adjustments to the material being drilled. Also, there are reduced chances of having to repeat a project from the start.
In this article, we’re going to look at ways and processes that will ensure you achieve drilling straight holes with less effort when you follow and try these hacks for your DIY activities.
4 Tips for Drilling Straight Holes Every Time:
1. Maximum Concentration and Set-Up
Before commencing the drilling process, it’s very important to ensure you’re in an environment free from distractions and commotion. Another step involves marking the spot expected to be drilled to give you a rough idea of how you’re going to start your work.
More to that, ensure that your drill and the drill bits are in good condition and sharp respectively. A straight hole can only be drilled when you’re using a good-quality drill.
2. Using a Guide Attachment
If you want to drill with the most accuracy, then acquiring a drill guide attachment is inevitable. This equipment is very important since it changes your hand drill to become a drill press that’s more accurate to drill straight holes.
You should ensure that you purchase a drill guide attachment that can be used to drill vertically, horizontally, and even at various angles. In this case, acquiring a guide attachment that can drill at 90 degrees angle is required for straight hole drilling.
We love guide attachment because it has guide bars that are used to perform repetitive drilling for straight holes Additionally, it’s possible to set your preferred depth on your straight hole with this equipment.
More Read: Best Cordless Drill Under $75
3. Using a Drill Block
A drill block has different-sized holes that give you the option to achieve straight holes on many surfaces made from a variety of materials. With its bushing block held tightly or clamped, you can create 90 degrees’ holes without much struggle.
You don’t have to worry about accurate alignment when drilling straight holes as a drill bock has vertical and horizontal centerlines for that purpose.
4. Using an Old CD
For drilling requirements that don’t require 100% accuracy and if you don’t have enough money to purchase a piece of professional equipment for drilling straight holes, then this is a good option for you. A CD contains a disc hole that is round in shape and can be used to make straight holes.
You should place the disc hole in the precise location on your working surface where you need the straight hole drilled. However, it’s important to ensure the drill bits are positioned in a straight position for the best results.
Extra Drilling Tips to Achieve Straight Holes
- Use the drill properly by following the manufacturer’s recommendations and the provided user guide.
- Always ensure that all the drill bits are sharp at all times for maximum functionality. If you have worn-out or missing drill bits, they should be replaced before you start using the drill.
- Ensure that you have tightly secured the material that you’re drilling to ensure there is zero or less movement when you’re making a straight drill.
- Avoid using excessive force and too much drilling speed while you’re drilling hard surfaces as they may cause the straight hole to become crooked.
Also Check: Top Rated Corded Drill Below $100
Drilling of crooked holes on a surface may cause damage to the material if straight holes are required to complete a project. It’s very common to move your hand or drill while making a straight hole and therefore important to ensure we put measures before commencement.
Depending on your budget, we have both inexpensive and expensive ways to make straight hole drilling possible. When you’re working on professional projects, it’s advisable to use more professional equipment to avoid human errors. On the other hand, for DIY projects at home, you can use homemade solutions in case you can’t afford professional machinery. It’s therefore your decision to decide which way to go about making your holes straight.